Errore nel formato dell'e-mail
emailCannotEmpty
emailDoesExist
pwdLetterLimtTip
inconsistentPwd
pwdLetterLimtTip
inconsistentPwd
WAFER TYPE CHECK VALVE
The clamping check valve meets the requirements of clamping installation. Ideal for water treatment applications, this product can be used in single or multi strand pipelines, with metal plate or cast iron structure. This check valve is characterized by a built-in piston. When subjected to excessive flow pressure, the piston will deflect upward. When the pressure is relieved, the piston will close automatically.
Product introduction:
The clamping check valve meets the requirements of clamping installation. Ideal for water treatment applications, this product can be used in single or multi strand pipelines, with metal plate or cast iron structure. This check valve is characterized by a built-in piston. When subjected to excessive flow pressure, the piston will deflect upward. When the pressure is relieved, the piston will close automatically. Wafer check valve is a one-way valve used to regulate fluid flow in closed systems. It consists of a cylindrical valve body and a valve disc with a spring. It opens under pressure and closes under inlet pressure. The face seal design makes the pressure leakage between ports very low.
Wafer check valve is a product with good quality and performance. It has more than 30 years of production experience in wafer check valve. We now have many wafer check valves of different designs, each of which has its own advantages. Wafer check valves are sold to customers all over China and abroad. The design of the clip on check valve is simple and unique, which can not only effectively prevent the leakage of hot water flow, but also avoid the turbulence caused by the flange.
Product advantages:
the clamping check valve is a check valve with pressurized seal and built-in valve seat, which has the ability to guide fluid flow at high speed. The clamp on design, combined with stainless steel construction, provides durability while allowing the valve to be used in a wide range of applications. Clamping check valve will be the best choice for hydraulic system, water system and other situations requiring rapid sealing.
The clamp check valve is a compact and durable clamp check valve designed to prevent the reverse flow of water, waste water or other liquids. It is applicable to the installation or maintenance of equipment designed with flanges or threaded joints as a safety protection against backflow. This type of check valve can be easily installed on any size of pipe by clamping the valve body.
Wafer check valves are widely used in industrial fluid systems. They are characterized by simple structure, easy installation and maintenance. It can be equipped with a flange to install on the pipe wall, a clamp to install on the steel pipe, and a cover plate with a built-in gasket to install at the end of the pipe.
Product design:
This all plastic wafer check valve is a new design of check valve. It is clamped directly to the pipe for maximum flow protection. Its compact body means a lower profile and smaller mounting space. Its wide sealing surface allows you to specify a variety of materials resistant to chemicals, extreme temperatures and pressures.
The wafer check valve is a wafer type design, which uses a wing shaped bonnet mixed with the pipe, installed and sealed on the pipe wall. The new design will provide all the functions of the existing models, while providing longer component life and lower unit opening cost due to the self-cleaning and large flow design.
Design Description:
- Light and Compact
- “Zero Leakage” Sealing Design with Soft Seated
- Non Slam Design
- Bubble Tight Clost Off
- Discs open 85° to ensure a low pressure drop
| Brand | APIRT |
|---|---|
| Structure | Wafer Type |
| Valve Material | APIRT provide cast steel, stainless steel, special alloy, CI, DI etc |
| Valve Type | APIRT Produce Wafer Check Valve |
| Valve Test | 100% quantity tested before delivery |
| Valve Guarantee | 18 months after shipments and 12 months after installed |
| Valve Structure | Single Plate Wafer Check Valve |
| Valve Delivery | 15 - 30 days |
| Valve Sample | Sample Available by Didtek Valve |
| Valve Color | Customer request |
| Valve Packing | Plywood Case for Butterfly Valve |
| MOQ | 1 Set |
| Valve Certificate | API6D/CE/ISO9001/ISO14001 |
| Place of Origin | Zhejiang, China (Mainland) |
| Delivery Detail: | Shipped in 15-30 days after payment |
| Port | Shanghai Or Ningbo |
| Payment Terms | L/C,D/A,D/P,T/T, Western Union |
